AI that plugs into the systems you already run.
Subtropic Systems designs and builds custom AI for small and mid-sized businesses across Brisbane, the Gold Coast, the Sunshine Coast and the corridors in between. Not a chatbot bolted on the side of your website: working agents that read your email, pull from Xero, update your job management system and leave a person to approve what matters.
What an AI agency actually builds for a Queensland SME
"AI agency" covers a lot of ground, from people who make marketing images to people who train models. We sit at the practical end. Our work is building small, specific pieces of software that use AI to do a recurring job inside your business, end to end, with a human in charge of the outcome.
A typical build has three parts. First, a trigger: an email lands in the accounts inbox, a job is marked complete in your job management system, a supplier sends a price list, a booking comes in. Second, the AI step: reading the document or message, deciding what kind of thing it is, pulling the right details out of it, and drafting the next action. Third, the hand-off: the drafted invoice sits in Xero waiting for approval, the job card gets updated, the tender question gets a first-draft answer with its sources attached, and someone in your team gets a short message saying what is ready to check.
The AI is genuinely good at the middle part, the reading and drafting, which is where most of the admin hours go. It is not good at being trusted blindly, which is why every build we hand over has an approval step until you decide otherwise.
What we do not build: replacements for your accounting package or job system, apps that need your crew to learn a new screen, or anything that has to be "rolled out" with a change-management plan. If the answer to your problem is a whole new platform, we will tell you so on the first call and point you somewhere else.
Three kinds of Brisbane business, three kinds of build
Most of our thinking about South-East Queensland comes back to three groups of businesses. They have different paperwork, different peaks and different systems, so the builds look different too. The industries page goes into each one in detail.
From the site to the invoice without retyping
Builders, electricians, plumbers, civil and fit-out contractors. The work lives in a job management system, the money lives in Xero, and the gap between the two is filled by someone retyping. Typical builds read supplier invoices and match them to jobs, turn a completed job into a draft invoice, and chase variations that were approved on site by text message but never written up.
Enquiries answered while you are running the tour
Tour operators, venues, accommodation and caterers from the Gold Coast to Noosa and out west. The busy weeks are the school holidays, exactly when nobody has time for the inbox. Typical builds answer the routine enquiries from your own rates and policies, put group bookings into the right format for your booking system, and pull post-season numbers together for the bank or the accountant.
Tender paperwork that does not eat a week
Businesses that sell to councils, state agencies and the large contractors who work for them. The capability statements, insurance certificates and past-project summaries are the same every time, but they get rebuilt for every response. Typical builds keep a checked library of your own material and draft each response from it, with every claim traceable to a source document you approved.
Integrations are the job, not an extra
The difference between an AI demo and an AI tool your team keeps using is whether it is connected to the place the work already happens. That is why most of our effort on any build goes into the connections rather than the AI itself.
Xero
Xero has a well-documented API that lets software create and read invoices, bills, contacts, payments and reports under permissions you grant. That makes it one of the easier systems to build around. Common builds: drafting bills from supplier invoices that arrive by email, preparing sales invoices from completed jobs, pulling aged receivables into a weekly summary, and drafting polite reminders for overdue accounts that someone approves before they go.
Job management software
Trades and service businesses in Queensland run on a handful of job management products, ServiceM8, simPRO and AroFlo among them, plus plenty of industry-specific tools. Most offer an API or some form of integration, but what each one exposes varies a lot, and some only allow certain actions on higher subscription tiers. Checking exactly what yours allows is part of the audit, so nobody discovers a limitation in week five.
Microsoft 365
For most businesses, Microsoft 365 is where the email, the calendar, the shared files and the Teams chats live. Microsoft's Graph API lets an approved application read and act on those with permissions that your administrator grants and can withdraw. We ask for the narrowest permissions a build needs, write down why each one is needed, and keep the agent's actions inside the mailboxes and folders it was set up for.
And then there is the spreadsheet. Nearly every business we talk to has one critical spreadsheet holding something together. We would rather connect to it properly than pretend it does not exist. More on all of this on the integrations page.
A build, week by week
SG1 Consulting runs every engagement in the same three stages. The first two have published starting prices; the third is priced to whatever you decide to expand into.
- Weeks 1–2 · AI Opportunity Audit (from $2,500). Interviews with the people who do the work, a walk through the systems and the paperwork, and a ranked list of three to five opportunities with the time each one costs you now. You get a 90-day plan and a scoped first pilot. If the audit finds nothing worth building, the report says that.
- Weeks 3–4 · Build. The first one or two automations get built inside your systems, with the approval step and a log of everything the agent does.
- Weeks 5–8 · Test and train (pilot from $5,000 in total). The automation runs on real work with your team checking every output. We adjust the instructions, fix the edge cases and measure the actual time saved against the audit's estimate.
- After that · Scale and optimise. Roll out to more people, connect the next system, add the next process. Priced to the work, with monthly reviews if you want them.
The how a build runs page has more detail, including what you get handed over and how the automations are maintained once the pilot ends.
Five questions worth asking any AI agency
Whether you end up working with us or somebody else, these are the questions we would ask in your position. A good agency answers all of them without squirming.
1. Where will my data go, and who can see it?
Ask which AI providers will process your documents, whether your data is used to train their models, and where it is stored. Australian businesses covered by the Privacy Act have obligations about personal information that do not disappear because a contractor is involved.
2. What happens when it gets something wrong?
Every AI system makes mistakes. The useful question is how mistakes are caught. Look for an approval step on anything that leaves the business, a log you can read, and a clear way to switch the automation off.
3. What do I own at the end?
If the agency keeps the accounts, the code and the instructions, you are renting your own process from them. Ask for a handover list in writing before you start.
4. How will we know if it worked?
Agree on the measure before the build starts: hours per week on a task, days from job completion to invoice, number of enquiries answered the same day. Then measure it again at the end of the pilot.
5. What will this cost to run after you leave?
AI usage costs money every month, and so do some integrations. Ask for an estimate of running costs alongside the build price, and ask what maintenance looks like if a connected system changes.
What one build might look like
This is an illustrative scenario, not a client story. It shows the shape of a typical first pilot.
A fit-out contractor working out of an industrial estate on Brisbane's southside has a part-time bookkeeper and two project managers. Supplier invoices arrive in a shared mailbox as PDFs. Each one has to be matched to a job in the job management system, coded, and entered as a bill in Xero. Variations agreed on site are mentioned in emails and texts but are often left off the final invoice.
The pilot does two things. When a supplier invoice arrives, the agent reads it, finds the purchase order or job it belongs to, drafts the Xero bill with the right coding, and flags anything that does not match: a different price, a missing PO, a supplier it has not seen before. The bookkeeper approves the bills in a batch. Second, when a project manager marks a job complete, the agent collects every variation mentioned in that job's emails and notes and lists them next to the draft invoice, so nothing agreed on site is forgotten.
Nobody's job changes much. The bookkeeper checks instead of types. The project managers stop hunting through their sent folders on invoice day. And because the build is inside the existing systems, there is nothing new for the site crew to learn.
Things Brisbane owners ask on the first call
Do you have an office in Brisbane?
No, and we would rather say so up front. SG1 Consulting runs projects remotely. Discovery interviews, workshops and handover training happen on video, and the build itself happens inside your own systems through properly scoped access, so there is little that needs a desk in the same city.
Will we have to replace Xero, our job system or Microsoft 365?
No. The whole point of the work is that the AI fits around what you already run. If a system has no usable API we will tell you during the audit, and we will suggest the least disruptive workaround, which is sometimes a scheduled export rather than a live connection.
What does a first project cost?
SG1's published prices are an AI Opportunity Audit from $2,500 (about two weeks), then a pilot from $5,000 that builds one or two automations over 30 to 60 days. Expanding after that is priced to the work. The 15-minute call costs nothing.
Who owns what you build?
You do. The automations run in accounts your business controls, and at handover you get the documentation, the prompts and instructions the AI works from, and a list of every connection and permission it uses. See how a build runs for the handover checklist.
Does the AI send things without anyone checking?
Not unless you decide it should. Every build starts with a person approving anything that leaves the business: a quote, an invoice, an email to a customer, a tender response. Some steps can be loosened later once you trust them; that is your call, not ours.
Can you work with our IT provider?
Yes, and it usually helps. Many Brisbane businesses have an outside IT company looking after Microsoft 365. We send them a short list of exactly what access the build needs and why, so they can approve it or push back before anything is connected.
Talk it through for 15 minutes
Pick a time that suits you. The call is free and runs for 15 minutes on video or phone. Come with one job you would like off your plate, and the systems it touches: Xero, your job management software, Microsoft 365, a spreadsheet, whatever is real.
Times are shown in your own time zone. Calls are run during Sydney business hours. Queensland does not use daylight saving, so between October and April Sydney is one hour ahead of Brisbane and the slots will look an hour earlier to you than they do to us.
Rather write it down? Use the enquiry form underneath the times and you will get a reply by email.
Your time zone: Australia/Brisbane
Booked.
See you . A calendar invitation is on its way to your inbox.